Edge Styler PLUS PRO

WHEEL DRIVE

The machine has a wheel drive that pushes the moving knife forward. When the knife moves forward, the wheel traction helps increase the stabbing power. However, the resistance of the soil which the knife must penetrate will counter the stabbing, when the knife moves backward the wheel traction counteracts this, which creates a damping effect. In this way ELIET manages to counteract the vibration through the way the machine was built. In the machine's Pro model, an additional vibration damping system is integrated into the steering wheel. This also filters out the high-frequency vibrations.

STUDDED WHEELS

A football player has studs on his shoes to provide a better grip on the field. The wheels of the ELIET Edge Styler PLUS PRO were also equipped with rubber studs to have a better grip on the lawn, especially when it is wet. This offers the extra advantage that your terrace will not be damaged when you drive over it.

KNIFE CHOICE

This innovative machine was mainly designed to mechanize making lawn edges. The technique used is that of a stabbing knife.  In this case, the knife makes horizontal stabbing motions where a small sod at the edge of the lawn is cut away and this creates a smooth edge that gets the shape of the knife.

Depending on the type of knife that is used the machine can be deployed for a number of other applications:

U-shaped knife  : cutting shallow trenches in a lawn to install irrigation systems or DC low-tension cables.

Angle knife:   for removing sods between hard paving and a lawn in order to recreate a space which prevents the paving from being overgrown.

Cable driving knife:  to outline the work space for robot mowers a wire must be installed.  Using a special knife and unwinding system, the Edge Styler can be used to bury a DC cable in the lawn without damaging it.

Golf bunker knife:  allows for very high edges to be maintained, as is the case for bunkers on a golf course.

ENVIRONMENT FRIENDLY

The ELIET Edge Styler PLUS PRO has an engine with an integral reduction gearbox. This enables the torque to be increased approximately 6-fold. Consequently, the engine does not have to run at full throttle. 2,800 rpm is more than ample to provide enough power to the blade and the wheel drive. This characteristic improves the petrol consumption, and the operator also benefits from a reduced noise level.

GUIDE

If a lawn edge has collapsed or is partially destroyed, it is usually better to cut a new edge.In this case, it is recommended to mark out a new edge using a piece of string as a reference. You then use the handy guide at the front of the edge dresser to follow the path of the string.

FREE STYLE CURVES

These days landscaping allows for unlimited creativity.  Lawns with straight corners were replaced by free-form lawns.  The Edge Styler PLUS PRO was designed to, in addition to the classic straight borders, also install those round shapes without any problem. 
Two features in the design make this possible: 

• The machine is designed to ride on two wheels.  Two wheels provide perfect sideways stability but still allow for extreme manoeuvrability.   The machine does in fact have three wheels, but the third wheel is a swivel wheel and doesn't impede the machine's manoeuvrability, but it was added to the design at a later stage to increase the operator's comfort.
• The knife moves at the level of the axle line of the two carrying wheels which insures that it seamlessly follows the wheels' tracks.  This makes it easier for the operator to form the desired round shapes.  

PEDAL WITH RATCHETING MECHANISM

The ELIET Edge Styler PLUS PRO features an "ratcheting step pedal" on the lower right of the machine, allowing the operator to use the strong leg muscles to position the blade to the desired work position prior to inserting it into the soil. The release handle for the blade mechanism is on the left-side handle grip. Elevate the rear of the machine off the soil and squeeze the handle to release the blade control mechanisim. Step on the pedal repeatedly until the blade has racheted to the desired work position. Then lower the rear-end of the machine and guide the blade into the soil.
It is important that you rachet the blade to the correct work position before inserting it into the ground, so as not to unduly stress the blade racheting mechanism.

This convenient blade control system is another example of ELIET's devotion to ergonomic excellence!

LOW VIBRATION LEVEL

Because the machine makes stabbing movements to create the lawn edges, this logically creates pulsating or jolting movements, which is unpleasant for the operator.

SWIVEL WHEEL

The machine is designed to ride on two wheels. Two wheels provide perfect sideways stability but still allow for extreme manoeuvrability. The machine does in fact have three wheels, but the third wheel is a swivel wheel and doesn't impede the machine's manoeuvrability, but it was added to the design at a later stage to increase the operator's comfort.
* The knife moves at the level of the axle line of the two carrying wheels which insures that it seamlessly follows the wheels' tracks. This makes it easier for the operator to form the desired round shapes. For cutting straight borders the swivel wheel can be locked in its straight position. This reduces the moveability of the machine, which is not desirable for cutting straight borders. The guidance arrow on the side of the machine serves as a guideline if the operator laid out the border in advance using a tie line.

ADJUSTABLE STEERING WHEEL

The ELIET Edge Styler PLUS PRO tries to offer the operator optimum comfort and ergonomics.  As already noted, special care was taken to lower the vibration level for the operator.  This avoids tiring the upper body when working long hours.  In order to give the operator the ideal bearing during use, the height of the steering wheel can be adjusted continuously.  Because the machine was also designed to maintain the edges of bunkers on golf courses, the steering wheel can also be adjusted sideways at an angle so that the operator can work in a comfortable position independent from the waves and slopes of the terrain.

ANTI-DEVIATION DISK

When cutting a free lawn edge, the machine tends to drive itself away from the lawn edge because of the pressure on the wing when cutting off the sod.  That is why the machine is equipped with an anti-deviation disk.   This jagged disk can be lowered which causes the teeth to press into the soil when driving the machine.  They act as an ‘anchor’, which prevents the machine from drifting sideways.  This allows the operator to cut the lawn edges without interruptions.

GOOD VIEW OF THE WORKING AREA

The blade that digs the cable into the ground is on the side of the machine, offering the user an excellent view of the working area. It also ensures more freedom of movement in the curves.

SAFE DEPTH

The specially designed blade meticulously cuts through the grass turf without causing any visible damage. The DC wire is fed through the blade via a tube and dug into the lawn at a depth of approximately 5 cm. At this safe depth, the wire doesn't risk being damaged during later lawn treatment such as aerating or overseeding.

COIL SUPPORT

The Edge Styler PLUS PRO comes with a coil support that can be adapted to several types of wire spools.