Super Prof 2000
The performance figures of the ELIET SUPER PROF are awesome – waste from eight hours of pruning is easily chipped in one hour – despite the fact that this 83 cm-wide piece of performance engineering is easily manoeuvred past all garden entrances and gates. Does it still need to be said ? The Eliet Super Prof offers the ultimate price-quality ratio.
Your comfort was the priority that was top of our engineer’s minds when they designed the wheel drive. You cannot simply move a shredder weighing 350 kg wherever you want. So the Super Prof is also available self-propelled. Each of the two drive wheels is equipped with a powerful hydraulic motor. If you purchase the self-propelled version, then you will be able to navigate any rugged terrain or slope with the greatest of ease. The swivel caster wheels provide the necessary manoeuvrability for weaving between obstacles in gardens, parks and woods. A handlebar mounted lever allows you to change forward or reverse speeds with a simple flick of the wrist. The further you move the lever forwards or back, the faster the machine moves in the chosen direction.
ABM SYSTEM (ANTI-BLOCK MOTOR)
This ingenious system automatically controls material feed speed. A sensor carefully monitors each change in engine speed. In an engine overload condition, the ABM electronics will translate this into a command to temporarily inhibit in-feed roller rotation. Whenever there is a risk of overload, the ABM system will cut out wood feed until the engine has come up to full speed. Thus, no branch is capable of stopping the Eliet Super Prof from performing its work. Since the machine chips all of the wood without any operator intervention, you can continue to work without having to pay attention to the operation of the machine. So you attain maximum efficiency for an incredibly low consumption of 3.2 litres per hour.
This chipper has an operating life in excess of 2,000 hours. This can only be achieved by guaranteeing optimal quality and durability. A mere look at the welded steel frame of the Super Prof tells all : Then you will immediately understand what ELIET means by this.
A large feed hopper is required to feed the 18 hp engine. The feed-in opening has a small protuberance that acts as a feed table when feeding a bunch of branches into the hopper. The feed-in width (660 mm) only becomes slightly narrower (480 mm) to the chipping width. This prevents the wider branches from becoming jammed in the feed hopper. The steel safety screen protects the operator against flying chippings.
HYDRAULIC IN-FEED ROLLER
This powerful 50-cm-wide in-feed roller boosts your efficiency to astronomical heights. All you need to do is feed in the wood, the machine itself draws in the wood at a speed of 24 metres per minute. The feeding power leaves even the widest branches no chance whatsoever. Large volumes of branches with a lot of side shoots are mercilessly drawn towards the knives. You can also manually change the direction of rotation of the in-feed roller (forward feed/reverse feed/stop). Going around the feed-in opening, this full wrap around handle is always within reach as a an emergency stop.
The Super Prof 2000 chips all garden waste with a maximum diameter of 12 cm into small pieces. The work is performed by a rotor with 24 razor-sharp blades. These steel blades can be sharpened. When one cutting edge is worn down, the blades can be reversed so that the second new cutting edge can be used.
ELIET RESIST(TM) BLADES
The blades that are fitted to the Super Prof are not ordinary steel blades. The Super Prof is designed to operate at least 8 hours a day. The blades have been specially designed so that their blade life matches the workload and duty cycles. A special steel alloy and refined thermal treatment of the cutting edges have resulted in blade life being at least doubled. It is therefore only logical that these blades have been given the name RESIST™.
RUBBER WALL LINING
The rubber covering absorbs the drumming effect produced by the chips on the panels inside the chipping chamber. This ensures that the noise level of the chipper is significantly reduced and will limit noise pollution to the absolute minimum.
QUICK-CLOSING SIEVE SCREEN
Access can be easily gained to the blade shaft in order to perform necessary sharpening or maintenance work. After opening the quick release system, the calibrating sieve around the blade shaft can be easily folded down. The blade shaft is then fully exposed so that the blades can be sharpened without having to remove them from the machine.
REAR NET FLAP
The chippings can often be processed in the garden, so that there is no need to remove them from your garden. In this case, you simply allow the chips to fall on the ground behind the machine. ELIET have invented an extendable flap in the safety net in order to ensure that the pile of chips is as large as possible before the machine is moved. This flap also retains any flying wood chippings that may be thrown up at the discharge.
Simply turn the key… Ready for processing massive volumes. There is no simpler or quicker way of starting.
WELL-ORGANISED INSTRUMENT PANEL
In addition to the start key, a number of new devices have been added to the instrument panel. You will see the standard maintenance counter that not only contains the standard hours run counter, but also a tachometer function and a maintenance alarm. The instrument panel also incorporates an oil level warning light, the ABM system and the choke and throttle controls. This means that the operator only has to monitor one location.
SWIVEL CASTER WHEELS
It must be easy to accurately steer this powerful wood chipper through well-kept gardens. The two castors instantly obey each steering command and ensure that the operator is able to position the machine where he wants it to be.
The parking brake ensures that the machine remains stable during use. Above all, you can safely transport your pride and joy on your trailer. The parking brake also works as an emergency brake while driving down inclines.