Prof 6 On Wheels

Features
ABM SYSTEM

ABM SYSTEM

The ELIET PROF 6 has an additional option, namely an ABM system (Anti-Block Motor), also used in the ELIET Prof 5. This ingenious system fully autonomously regulates the feed speed. A sensor meticulously controls every change in the revolutions of the engine.

V-safe infeed hopper

V-safe infeed hopper

The specially shaped V-safe infeed hopper ensures that larger parcels of pruning waste can be fed in quickly and safely.

Impeller

Impeller

Natural trimming chips are not discharged on the basis of the removal force of the blade system, but are carried away by the powerful airflow generated by the 325 mm blade turbine.

BLOW CHUTE

BLOW CHUTE

The Prof 6 blow chute is a fine example of engineering. Its shape prevents turbulence and the design of the curve was based on the optimal trajectory of the fl ying chips. As a result the machine
has phenomenal propelling capacity. The choice for synthetics as the material for the blow chute was a very deliberate one: it is seamless, corrosion resistant, perfectly smooth and sound absorbing. Its low air resistance makes the chute less inclined to clog. The blow chute has a discharge height of 1,8 m / 6 ft and a rotation span of 280°.

Agricultural tyres

Agricultural tyres

WHEEL DRIVE

WHEEL DRIVE

The wheels of the new Prof 6 were equipped with a powerful wheel motor. The speed forward or in reverse is controlled with a simple movement from the pulse via a rotating handle on the handlebar. The more the handle is rotated forwards or backwards, the faster the machine moves in that direction. The wheel drive is so powerful that it takes only one man to load or unload the machine from a van or a trailer.

Blades

Blades

The blades that are fitted to the Prof 6 are not ordinary steel blades. The Prof 6 is designed to operate at least 8 hours a day. The blades have been specially designed so that their blade life matches the workload and duty cycles.

MAINTENANCE-FRIENDLY

MAINTENANCE-FRIENDLY

Under the “FAST PITSTOP” motto, the machine is designed to be dismantled in record time to access the critical maintenance points. This typically does not require any tools. You can perform a quick check-up or routine maintenance at the end of each working day. It also facilitates somewhat more involved maintenance. This keeps the machine in top working order so it can deliver optimal performance every day.